詳細信息
產品概述：
1、p系列行星齒輪減速器采用模塊化設計，可根據客戶要求進行變化組合，
2、減速機采用漸開線行星齒輪傳動，合理利用內、外嚙合、功率分流，
3、齒輪均采用滲碳淬火處理，得到高硬耐磨表面，齒輪熱處理后全部磨齒，降低了噪音，提高了整機的效率和使用壽命。
4、齒輪減速器質量輕、體積小、傳動比范圍大、效率高、運轉平穩、噪聲低適應性強等特點。減速機廣泛應用于冶金、礦山、起重運輸、電力、能源、建筑建材、輕工、交通等工業部門。
性能特點：
1、p系列行星齒輪減速器采用漸開線行星齒輪傳動，合理利用內、外嚙合、功率分流。因此具有重量輕、體積小、傳動比范圍大、效率高、運轉平穩、噪聲低、適應性強等特點
2、箱體采用球墨鑄鐵，大大提高了箱體的剛性及抗震性。
3、輸入方式：n同心軸輸入，s斜齒輪輸入，k錐齒輪-斜齒輪輸入，l錐齒輪輸入。
4、輸出方式：a空心軸收縮盤式，b實心軸平鍵，c空心軸內花鍵式， d實心軸外花鍵式。
5、安裝形式：水平安裝，垂直安裝，扭力臂安裝。
6、采用模塊化設計，可根據客戶要求進行變化組合。
7、和r系列、k系列組合可得到更大速比。
技術參數：
速比范圍：基本型25～4000
扭矩范圍：2.6～900 knm
功率范圍：22～1920 kw
基本型號：
形式：p2n（同心輸入型） 速比25~40 機座號：9~34
p2l（錐齒輪輸入型） 速比31.5~100 機座號：9~30
p2s（斜齒輪輸入型） 速比45~125 機座號：9~34
p2k（錐齒輪加斜齒輪輸入型）速比112~500 機座號：9~20
p3n（同心輸入型） 速比140~280 機座號：9~34
p3s（斜齒輪輸入型） 速比280~900 機座號：9~34
p3k（錐齒輪-斜齒輪輸入型）速比560~4000 機座號：9~30
詳細數據請登陸我司網站，網址：http://www.xinjincd.com歡迎新老客戶來電咨詢、洽談。
products overview:
1, p series planetary gear reducer adopts modular design, can be combined according to the customer request to change,
2, the reducer with involute planetary gear transmission, reasonable use of internal and external meshing, power distribution,
3, the gear adopts carburizing and quenching treatment, with high content of hard wear-resistant surface, all gear grinding gear after heat treatment, reduces the noise, improve the efficiency and service life of the machine.
4, gear reducer, light quality, small volume, large range of transmission ratio, high efficiency, stable operation, low noise, strong adaptability, etc. reducer is widely used in llurgy, mining, lifting transport, electricity, energy, light industry, building materials, transportation and other industrial sectors.
performance characteristics:
1, p series planetary gear reducer with involute planetary gear transmission, reasonable use of internal and external meshing, power distribution. so it is light weight, small volume, large range of transmission ratio, high efficiency, stable running, low noise, strong adaptability, etc
using nodular cast iron 2, enclosure, greatly improving the body rigidity and vibration resistance.
3, input methods: n input, concentric shaft helical gear s input, bevel gear, helical gear type k, l input bevel gear.
4, output way: a hollow shaft shrinkage pan, solid shaft b flat key, inside the hollow shaft spline type c, d type solid shaft spline.
5, installation forms: horizontal, vertical installation, the installation torque arm.
6, the modular design, can according to customer requirements change.
7, and r series, k series combination greater speed ratio can be obtained.
technical parameters:
speed ratio range: basic 25 ~ 4000
the torque range: 2.6 ~ 900 knm
power range: 22 ~ 1920 kw
details please visit our website, website: http://www.xinjincd.com welcome new and old customers to inquire, negotiate.
